Autotrol® Performa Valve with 460i Control
Product Information

The Autotrol® Performa filter valve was designed for large residential and light commercial flow rates and applications. The Performa filter control is a three-cycle softener valve featuring outstanding backwash rates up to 20 gpm! Teamed up with the rugged 440i timer control, the Performa filter valve is the ideal solution for heavy-duty residential and light commercial filters.


Specifications

Flow Rates (Valve Only):  
Service @ 15 psi drop 25.0 gpm
Backwash (Softener) @ 25 psi drop 20.0 gpm
Service Cv = 6.5
Backwash Softener Cv = 4.0

Control Operation:  
Timer Configuration Time Clock, 6 or 7 Day
Cycles: Length (Standard):
Backwash 20 Minutes
Fast Rinse 12 Minutes

Valve Connections / Dimensions:  
Tank Thread 2 1/2 inch - 8, Male
Inlet / Outlet 1 3/4 inch –12 UNC-2A Male
Drain Line 3/4 inch NPT, Male
Brine Line 3/8 inch NPT, Male
Distributor Tube O.D. Diameter 1.050 inch (27mm)
Distributor Tube Length 1 1/8 inch ± 1/8 inch (29 mm ± 3 mm) above tank

Design Specifications:  
Valve Body Glass Filled Noryl*
Rubber Components Compounded for cold water
Weight, (Valve with Control) 4.5 lbs. (2.0 kg)

Ratings:  
Transformer Output 12VAC 400 mA
Transformer Input 115V 50/60 Hz, 230V 50/60 Hz, 100V 50/60 Hz
Operating Pressure 20 - 125 psi (1.38 - 8.6 Bar)
Water Temperature 35 - 100°F (2 - 48°C)

Options:  
Bypass Valve, Model 1265 1 3/4 inch –12 UNC-2A Male
Bypass Fitting Kits:  
Copper, Sweat Tube Adapter 1 inch or 3/4 inch or 28mm or 22mm
CPVC, Solvent Weld Tube Adapter 1 inch or 3/4 inch or 25mm
Plastic NPT Pipe Adapter 1 inch Male or 3/4 inch Male
Plastic BSPT Pipe Adapter 1 inch Male or 3/4 inch Male
Brass NPT Pipe Adapter 1 inch Male or 3/4 inch Male
Brass BSPT Pipe Adapter 1 inch Male or 3/4 inch Male

* Noryl is a registered trademark of the General Electric Company.

The whole house Wholly Water system is most effective at 10 GPM or less peak flow can be over 20 GPM  Larger versions are availble for higher flow rates.. Please email for a FREE QUOTE

The backwash may be set at 1,2,3 or 6 days between... Backwash drain line maybe 1/2 or 3/4 inch as needed..